WearMax Cleaner (MSDS)
Trustor Coatings, 505 North 72 nd Ave., Wausau, WI 54401
24 Hour Emergency Telephone: Infotrac (800) 535-5053
Section 1. PRODUCT IDENTIFICATION |
|
PRODUCT NAME: WEARMAX CLEANER CONCENTRATE
Section 2. HAZARDOUS INGREDIENTS AND EXPOSURE LIMITS |
Combination of supplements of food extracts.
Hazardous Ingredients: None
CAS-No.: not applicable
Section 3. HAZARDS IDENTIFICATION |
Not hazardous if used in the recommended way
Section 4. FIRST AID MEASURES |
Not necessary, without any danger for humans
.
Section 5. FIRE – FIGHTING MEASURES |
NOT FLAMMABLE – during evaporation due to heat, small quantities of carbon acid will be emitted.
Section 6. ACCIDENTAL RELEASE MEASURES |
Collect spills with absorbent Material, like rags or sponge, to reduce hazard of sliding
Rinse with clear Water.
Section 7. HANDLING AND STORAGE |
KEEP FROM FREEZING, store in original containers only
Section 8. EXPOSURE CONTROL/PERSONAL PROTECTION |
No technical protection measures necessary; During cleaning process with rags or sponge rubber or latex gloves can be used.
Section 9. PHYSICAL AND CHEMICAL PROPERTIES |
Physical state liquid Method
Flash point None
Viscosity at 20°C 13 s 4 mm DIN 53211
Specific gravity 1.0
Solubility in water Soluble
pH value 7.0 – 7.5
Section 10. STABILITY AND REACTIVITY |
Stable, no hazardous decomposition products known
Section 11. TOXICOLOGICAL INFORMATION |
Skin: unobjectionable Eyes: rinse with water
Section 12. ECOLOGICAL INFORMATION |
Water pollution class: 0
Section 13. DISPOSAL CONSIDERATIONS |
Product is classified as waste water; after usage depends
Section 14. TRANSPORT INFORMATION |
Product is not classified as dangerous for carriage.
Section 15. REGULATORY INFORMATION |
Non hazardous product
Section 16. other information |
|
HMIS Hazard rating:
Health 0
Flammability 0
Reactivity 0
The information of this MSDS is based on the present state of our knowledge and on current EEC and national laws as the user’s working conditions are beyond our knowledge and control. The product is not to be used for other purposes than those specified under section 1 without first obtaining written handling instructions. It is always the responsibility of the user to take all necessary steps in order to fulfill the demand laid down in the local rules and legislation. The information in this MSDS is meant as a description of the safety requirements of our product; it is not to be considered as a guarantee of the properties of the product.
Trustor Coatings believes the statements, technical information and recommendations contained herein are reliable. They are given without warranty or guarantee of any kind, expressed or implied.
DATE ISSUED: January 22, 2004 PREPARED BY: Trustor Coatings LLP
